USVD
USVD系列
绝对容差:所有电阻为 ±0.10%,在 +23°C ±2°C 下测量。
比率公差(RT : R2):见表。 比率容差在 +23°C ±2°C 下测得,施加于分压器的直流电压为 100 伏。
绝对 TC:USVD2——10 ppm/°C,参考 +25°C,ΔR 在 -40°C 和 +85°C 下测得。
比率温度系数(RT : R2):见表。 比温度系数从 -40°C 到 +85°C。
比率电压系数(RT : R2):见表。 最大比率 V.C. 在 Vmax 的 10% 时测量。 到 Vmax 的 100%。
额定电压:施加到 RT = (R1 + R2) 的最大电压(伏直流)。 见表。
负载寿命稳定性:在 +85°C 下将最大连续工作电压施加到分压器 1000 小时的比率稳定性,比率变化最大 0.02%。
过压:1.5倍额定电压持续5秒,比率变化最大0.02%。
热冲击:Mil-Std-202。 方法 107,条件。 A、除最低温度为-40°C外,比例变化最大为0.02%。
工作温度:-40°C 至 +85°C
Type USVD
Absolute Tolerance: ±0.10% for all resistors, measured at +23°C ±2°C.
Ratio Tolerance (RT : R2): See table. Ratio Tolerance measured at +23°C ±2°C, at 100 volts DC applied to the divider.
Absolute TC: USVD2: 10 ppm/°C,referenced to +25°C, ∆R taken at -40°C and +85°C.
Ratio Temperature Coefficient (RT : R2): See table. Ratio Temperature Coefficient from -40°C to +85°C.
Ratio Voltage Coefficient (RT : R2): See table. Maximum Ratio V.C. measured at 10% of Vmax. to 100% of Vmax.
Voltage Rating: Maximum voltage (volts DC) applied to RT = (R1 + R2). See table.
Load Life Stability: Ratio stability with maximum continuous operating voltage applied to the divider for 1000 hours at +85°C, ratio change 0.02% max.
Overvoltage: 1.5 times rated voltage for 5 seconds, ratio change 0.02% max.
Thermal Shock: Mil-Std-202. Method 107, Cond. A, except minimum temperature is -40°C, ratio change 0.02% max.
Operating Temperature: -40°C to +85°C
半岛手机综合体育登录
联系我们
电话:15021595573
邮箱:sales@sansonic.com.cn
地址:上海市闵行区新龙路360弄万金中心T2-508
版权所有:半岛手机综合体育登录 沪ICP备06045728号-1